Tripp Lite DVI over Cat5/6 Extender Wall Plate Receiver for Video DVI-I Single Link RJ45 Up to 200 ft. (60 m) - 1 Output Device - 200 ft Range - 1 x Network (RJ-45) - 1 x DVI Out - Full HD - 1920 x 1080 - Twisted Pair - Category 6 - Wall Mountable

The B140-1A0-WP-1 DVI over Cat5/6 Extender works in tandem with Tripp Lites B140-002 or B140-004 extender/splitter transmitter unit (sold separately) to extend a DVI-D single-link signal over a single Cat5e/6 patch cable. It can extend a 1920 x 1080 (@ 60 Hz) signal up to 46 m (150-ft.) and a 1024 x 768 signal (@ 60 Hz) up to 61 m (200-ft.) Its ideal for digital sign applications in schools, churches, trade shows, retail settings and anywhere else a high-resolution DVI signal needs to be delivered over a long distance. Just connect a B140-002 or B140-004 transmitter to the DVI source using a DVI cable, such as Tripp Lites P561-Series. Connect the B140-1A0-WP-1 to the transmitter using a Cat5e/6 cable (for best results, use Tripp Lite N202-Series 24 AWG solid-wire Cat5e/6 cable) and connect to the display using a DVI cable. To expand the range and the number of displays, add up to three B140-110 remote repeaters and an active receiver to each channel for a total of four displays per channel. A 1920 x 1080(@ 60 Hz) signal can be extended up to 38 m (125-ft.) to the next unit in the chain, and a 1024 x 768 signal (@ 60 Hz) up to 53 m (175-ft.). The B140-1A0-WP-1 works with all operating systems. Its plug-and-play technology means no software or drivers need to be downloaded and installed. Built-in equalization control allows for manual adjustment of the video image. Plug and play-no software or drivers to download Easy RJ45 connector on wallplate back Built-in equalization control for image adjustment Compatible with all major operating systems Supports video resolutions up to 1920 x 1080, including 1080p