SIIG 4K HDR HDMI 2.0 HDBaseT Extender Over Single Cat5e/6 with RS-232 & IR - 60m - 1 Input Device - 1 Output Device - 196.85 ft Range - 2 x Network (RJ-45) - 1 x HDMI In - 1 x HDMI Out - Serial Port - 4K - 3840 x 2160 - Twisted Pair - Category 6

Extends HDMI 2.0 audio and video signal from your HDMI source to a remote HDMI display up to 196ft (60m) away at Full HD 1080p, or 114ft (35m) at 3840x2160@60Hz (4:4:4 8bit/HDR10 4:2:0 10bit) through a single premium quality CAT5e/6 cable. Delivers crystal clear picture quality with resolution up to 3840x2160 @60Hz YUV444 8bit and HDR 3840x2160 @60Hz YUV420 10bit. Pure unaltered uncompressed 7.1ch digital HDMI over CAT cable transmission, DTS-HD Master Audio and Dolby TrueHD high bit rate audio support. Supports PoC (Power over Cable) technology which allows both the transmitter and receiver units to be powered through only one power adapter. Bi-directional IR sensors allow you to remotely control the HDMI source device from the remote display side or control the remote display from the source device side. High quality metal housing with cooling slots provide excellent ESD and electromagnetic protection plus excellent heat dissipation and cooling for stable operation during extended hours of use. Slim profile design easily adopts into versatile application environment, wall mountable housing for easy and varied installation requirements. Note: Does not support connecting to Router or Switch. Video latency: <20µs Audio support: DTS-HD Master Audio and Dolby True HD Video bandwidth up to 18Gbps (600MHz per channel) Supports EDID bypass, CEC, Deep Color 36bit Bi-directional IR pass-through supports full frequency IR signal from 20KHz to 60KHz Supports 3840x2160@60Hz 4:4:4 8bit Full Duplex RS-232 control up to 11,5200 bps through connector Supports 3840x2160@60Hz HDR10 4:2:0 10bit Auto skew equalization Compliant with HDMI 2.0 and HDCP 2.2