Perle SMI-110-S1SC40D - Fiber media converter - 100Mb LAN - 10Base-T, 100Base-TX, 100Base-BX - RJ-45 / SC single-mode - up to 24.9 miles - 1550 (TX) / 1310 (RX) nm

Link pass-through. With link pass-through the state of the UTP receiver is passed to the fiber transmitter to make the media converter appear transparent to the end devices that are connected. Auto-negotiation. The media converter supports auto negotiation on the 100 Base-TX interface. Unidirectional Ethernet. When enabled, provides the ability to restrict port to one-way traffic flow. Used in applications such as unidirectional video broadcasting as well as providing security for Ethernet connections in accessible public areas. Remote loopback. The media converter is capable of performing a lookback on the fiber port. Auto-MDIX. Auto-MDIX (automatic medium-dependant interface crossover) detects the signaling on the UTP interface to determine the type of cable connected (straight-through or crossover) and automatically configures the connection when enabled. Unknown unicast frame filtering. When enabled, unicast frames with an unknown destination address are not allowed to egress the port. Detailed port statistics. To assist in troubleshooting copper and fiber links, an extensive list of ingress and egress counters for both copper and fiber ports are available. Pause (IEEE 802.3xy). Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed. Configuration mode selection. Select whether to use the on-board DIP switches or the management software for mode selection.