Perle SMI-100-S2LC80 - Fiber media converter - 100Mb LAN - 100Base-FX, 100Base-TX - RJ-45 / LC single-mode - up to 24.9 miles - 1550 nm

Inactivity timeout. Protect secure management sessions by setting an inactivity timeout value. Concurrent management sessions. Run multiple management sessions simultaneously for multiple users. Firmware download. Update level firmware for management and media converter modules via TFTP. Auto-negotiation. The media converter supports auto negotiation on the Fast Ethernet 100 Base-TX interface. Network services filter. Enable only those network services on the management module that are allowed on your network. Far-End Fault (FEF). The action the media converter takes on receiving a Far-End Fault indication is dependent on the link pass through switch setting. Configuration mode selection. Select whether to use the on-board DIP switches or the management software for mode selection. Console port CLI access. Out-of-band command line access via Cisco compatible RJ45 serial console port using common "rolled" Cat 5 cable. Access control list. An access control list can be created which can filter out only those workstations that are authorized to access the management resources. Filter on IP and/or Ethernet MAC addresses. Link pass-through. Using link pass-through with Far-End Fault minimizes data loss when a fault occurs. Should a fault occur, the end devices have the indication of a failure available to them making trouble shooting easier.