Perle S-1110PP-S1SC10U - Fiber media converter - GigE - 10Base-T, 100Base-TX, 1000Base-T, 1000Base-BX - SC single-mode / RJ-45 - up to 6.2 miles - 1310 (TX) / 1490 (RX) nm

Pause. Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed. The media converter supports pause negotiation on the 1000 Base-X fiber connection. Fiber fault alert. With fiber fault alert the state of the 1000 Base-X receiver is passed to the 1000 Base-X transmitter. This provides fault notification to the partner device attached to the 1000 Base-X interface of the media converter. Redundant primary fiber. If the "fiber redundancy" feature is also enabled, the primary fiber 1 link is continuously monitored and if is restored for at least 6-second, the link will be switched back from the secondary fiber 2-port to the primary fiber 1 port. Auto-MDIX. Auto-MDIX (automatic medium-dependant interface crossover) detects the signaling on the copper Ethernet interface to determine the type of cable connected (straight-through or crossover) and automatically configures the connection when enabled. The media converter can also correct for wires swapped within a pair. PD power reset. Ideal for remotely resetting equipment, this configurable function performs a momentary power reset to the attached Powered Device (PD). When enabled, the media converter will, upon loss of fiber RX, turn off PSE output power supplied to the PD device for 2-second then turn the power back on and leave it on until such time that another fiber RX link is lost. Smart link pass-through. When the link mode switch is placed into smart link pass-through mode, the copper Ethernet port will reflect the state of the 1000 Base-X media converter port. This feature can be used whether fiber auto-negotiation is enabled or disabled. Auto-negotiation. The media converter supports auto negotiation. The 1000 Base-X fiber interface negotiates according to 802.3 clause 37. The 1000 Base-X will link up with its partner after high common denominator (HCD) is reached and the copper has linked up with its partner.