Perle S-1000-S2SC10 - Fiber media converter - GigE - 1000Base-LX, 1000Base-LH, 1000Base-T - RJ-45 / SC single-mode - up to 6.2 miles - 1310 nm

Default operating mode. In the default operating mode (all switches up), the media converter will auto-negotiate on both the fiber and the copper links at the same time, thus achieving the best end-to-end Ethernet operating parameters. Error recovery. In certain configurations, and under specific conditions where the media converter brings down a link to convey status, there is potential for a deadlock. Recovery is achieved by momentarily restoring the link to see if the original failure has been resolved. Status LED. The Perle gigabit media converters have three single color status LEDs located on the front panel of the unit. Auto-MDI-X with skew correction. Auto-MDI-X (automatic medium-dependant interface crossover) detects the signaling on the 1000BASE-T interface to determine the type of cable connected (straight-through or crossover) and automatically configures the connection.